![](/images/new-backgrounds/1137542/13754213x1.webp)
LENS REPLACEMENT PROCEDURE (FOR "C" TYPE )
Perform the steps 1 to 6 for lens replacement.
First set the lens at the fully lower position with lens shift adjustment.
1 REMOVE THE LENS COVER AND FRONT CABINET
1.Turn the lens cover to
2.Remove 2
3.Remove the front cabinet
2 REMOVE THE LIGHT-BLOCK SHEET BASE AND LIGHT-BLOCK SHEET
1.Slide the
2.Remove the
SCREW "A"
FRONT CABINET
LENS COVER
SHEET BASE
SHEET
LENS COVER
FRONT
CABINET
3 REMOVE THE LENS
1.Grasp the Lens Lock Lever and turn it fully upward. Remove the Lens into the projector.
2.Disconnect the lens motor lead connector to the socket on the lens attachment.
3.Remove 4 Screws and remove lens attachment.
Pull the Lens Lock Lever upward
LENS LOCK LEVER
LENS
SCREWATTACHMENT
SOCKET
CONNECTOR
LENS MOTOR
LEAD
- 7 -