Fisher PC-27S10 USING THE REAR AUDIO / VIDEO INPUT JACKS, USING THE AUDIO OUTPUT JACKS, CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT

USING THE REAR AUDIO / VIDEO INPUT JACKS

CONNECTING A VCR OR OTHER EXTERNAL EQUIPMENT

Switch off TV and external equipment before connecting cables. (Cables are not supplied.)

1.Connect VCR or other equipment’s Audio Out (R/L) to the TV Audio Input (R/L) ❶.

For Mono VCR (Single Audio Jack) connect VCR Audio Out to TV Audio (L) In.

2. Connect VCR or other equipment’s Video Out to the TV Video In ❷.

3.Press POWER ❸ to turn on the TV. Turn on external equipment also.

4.Press the INPUT key ❹ to select program source: TV signal or signal from the equip- ment you have connected to the A/V jacks.

BACK VIEW OF VCR				REMOTE CONTROL
	A/V JACKS
RF	IN	VIDEO		INPUT POWER RESET
CHANNEL	R- AUDIO -L
CH3 CH4	OUT
		VIDEO
	R- AUDIO-L			MENU	RECALL	❸
❶					CH
		TV A/V INPUT REAR JACKS			❹
				UHF/VHF/CATV
		AUDIO	AUDIO VIDEO INPUT	75Ω
		OUTPUT	AV2
			VIDEO
		L	(MON0)
			L
			AUDIO
		R	R

❷

USING THE AUDIO OUTPUT JACKS

CONNECTING A STEREO AMPLIFIER TO AUDIO OUT JACKS

1.Connect the TV Audio Out (R/L) ❶ to the Stereo Amplifier In (R/L) ❷.

2.Press POWER to turn on the TV. Turn on external equipment also.

❶			UHF/VHF/CATV
	AUDIO	AUDIO VIDEO INPUT	75Ω
	OUTPUT	AV2
		VIDEO
	L	(MON0)
		L
❷		AUDIO
	R	R
		BACK OF TV

QuickTips

■Make sure all cable connectors are fully seated on jacks.

■Always match cables according to the colors; RED for right audio, WHITE for left audio and YELLOW for video.

■A solid Blue screen with the words Video displayed means that the Video mode is selected, but no signal is being detected at the Video jack.

■Position your TV at least 2 feet from stereo speakers. The magnets in the speakers may affect the picture quality. However, all Fisher STV model speakers are stray field compensated and may be placed next to TV sets without any special precautions.

■Do not connect external speakers directly to the TV.

STEREO AMPLIFIER 9