Part Names and Functions

Pointer Function

You can move Spotlight or Pointer of the projector with the remote control to emphasize a part of the projected image. (See “Pointer” on page 40 for changing the patterns and sizes.)

1

While pressing the MENU button, hold down the NO SHOW

 

button for more than 7 seconds so that the Pointer function

 

can be available. (The Laser pointer function has switched to

 

the Pointer function.)

2

Press the LASER button on the remote control toward the

 

projector and see if the LASER button lights green, and

 

Spotlight or Pointer is displayed on the screen. Then you can

 

move Spotlight or Pointer with the PRESENTATION

 

POINTER button. If the LASER button does not light green

 

and still emits laser beam, the Laser pointer function has not

 

switched to the Pointer function yet. Try these steps until

 

the LASER button lights green.

3

To clear Spotlight or Pointer displayed on the screen, press

 

the LASER button toward the projector and see if the LASER

button turns off.

To use the Laser pointer function once again, while pressing the MENU button, hold down the NO SHOW button for more than 7 seconds.

While pressing the MENU button, hold down the NO SHOW button for more than 7 seconds.

Spotlight

13