APPENDIX
CONFIGURATIONS OF THE TERMINALS
COMPUTER INPUT TERMINAL (ANALOG)
Terminal :
Connect the display output terminal of the computer to this terminal with the VGA Cable (supplied). When connecting the Macintosh computer, MAC Adapter (not supplied) is required.
Pin Configuration |
| 1 | Red Input | 9 | No Connect | ||||
|
|
|
|
| 2 | Green Input | 10 | Ground (Vert.sync.) | |
5 | 4 | 3 | 2 | 1 | 3 | Blue Input | 11 | Sense 0 | |
4 | Sense 2 | 12 | Sense 1 | ||||||
| 10 | 9 | 8 | 7 6 | |||||
15 | 14 | 13 | 12 | 11 | 5 | Ground (Horiz.sync.) | 13 | Horiz. sync. | |
|
|
|
|
| |||||
|
|
|
|
| 6 | Ground (Red) | 14 | Vert. sync. | |
|
|
|
|
| 7 | Ground (Green) | 15 | Reserved | |
|
|
|
|
| 8 | Ground (Blue) |
|
| |
CONTROL PORT CONNECTOR
Terminal : Mini DIN
Connect control port (PS/2, Serial or ADB port) on your computer to this connector with Control Cable (not supplied).
Pin Configuration |
|
| PS/2 | Serial | ADB | ||
|
|
|
| 1 | R X D | ||
|
|
|
| 2 | CLK | ADB | |
8 | 7 | 6 |
| 3 | DATA | ||
| 4 | GND | GND | GND | |||
5 | 4 | 3 |
| ||||
| 5 | RTS / CTS | |||||
2 | 1 |
|
| ||||
|
| 6 | T X D | ||||
|
|
|
| ||||
|
|
|
| 7 | GND | GND | |
|
|
|
| 8 | GND | GND | |
USB CONNECTOR (Series B)
Connect USB port terminal on your computer or peripheral equipment to this connector with USB Cable (not supplied).
Pin Configuration
2 | 1 |
3 | 4 |
1Vcc
2- Data
3+ Data
4Ground
42