COMPUTER MODE

SELECTING COMPUTER MODE

Direct Operation

Press the MODE button on the Top Control or the Remote Control Unit. The input source is selected among COMPUTER or VIDEO. The “Computer” or “Video” display will appear on the screen for a few seconds.

Computer

Video

Menu Operation

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button.

CURRENT MODE DISPLAY

When selecting the Computer Mode, the Current Mode display appears.

It shows the information of the computer of the mode selected.

SELECTING COMPUTER SYSTEM

Providing the information of the computer detected by the projector.

Automatic Multiscanning system

This projector automatically adapt to most different types of computer based on VGA, SVGA or XGA (refer to "COMPATIBLE COMPUTER SPECIFICATION" on page 26). When selecting Computer, this projector become automatically suited to the incoming signal and projectors the proper image without any special setting. (Setting of the Computer System may be required when connecting some computers.)

Note : The projector may provides the messages below.

Go PC adj. The projector cannot discriminate or detect the input signal from the computer. Adjust and set the computer system manually. (Refer to page 25.)

SYSTEM BOX

It displays the SYSTEM being selected.

No signal There is no signal input from the computer. Make sure the connection of the computer and the projector is set

correctly. (Refer to TROUBLESHOOTING on page 36.)

Selecting Computer System Manually

To set the Computer system manually, select the mode on the ON-

SCREEN MENU.

1

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select SYSTEM and

 

press the SELECT button. Another dialog box COMPUTER

 

MODE Menu will appear. (The COMPUTER MODE Menu also

 

appears by pressing the SYSTEM button on the Top Control or

 

the Remote Control Unit.)

2

Press the POINT DOWN button and a red-arrow icon will appear.

Move the arrow to the system that you want to set, and then press

SELECT button.

The system being selected.

The systems on this dialog box can be selected.

When this mark is displayed as black, more computer system modes will be available. Move the arrow to this mark and then press the SELECT button, and another mode will be displayed.

It closes the SYSTEM Menu.

24