Setting
Lamp mode
This function allows you to change brightness of the screen.
···· normal brightness
···· the controlled brightness according with input signal
···· lower brightness reduces the lamp power consumption and extends the lamp life
✔Note:
Lamp mode is not switched into Eco mode ( 
) within 2 minutes after the projector is turned on.
Remote control
This projector provides two different remote control codes; the
When operating the projector in “Code 2”, both the projector and the remote control must be switched to “Code 2”.
To change the code for the projector;
Select either “Code 1” or “Code 2” in this Setting Menu.
To change the code for the remote control;
Press and hold both the MENU and IMAGE buttons together for 10 seconds or more. After changing the code, make sure the remote control operates properly.
USB
This projector is equipped with the USB port for interactive operation between the projector and computer. Selects either of the followings as needed.
···· When using the PAGE ed buttons on the remote
control unit. (p11)
···· When controlling the projector with a computer.
This item is provided for future use. Not available now.
Key lock
Remote control
MENU VOLUME- SELECT VOLUME+
D.ZOOM PAGE KEYSTONE NO SHOW
AUTO PC
IMAGE FREEZE MUTE
Key lock
Press and hold MENU and IMAGE buttons for 10 seconds or more.
This function locks operation of the top control and remote control. It is useful to prevent operation by an unauthorized person.
···· not locked.
···· locks operation of the top control. To unlock, use the remote control.
···· locks operation of the remote control. To unlock, use the top control.
If the top control accidentally becomes locked and you do not have the remote control nearby, disconnect the AC power cord from the AC outlet, and then while pressing the SELECT button, reinsert the AC power cord. This will release the top control lock.
Select Key lock and this box appears. Choose one of these with the Point ed button and select [Yes] to activate it.
42