Fisher-Price 71985 instruction sheet Installation is complete

e

Instructions

Seal

Seal

Groove

Groove

3 4

•Look inside the groove surrounding the battery compartment.

•If your product DOES NOT have a seal, you must install one. Please follow steps 4 and 5.

•If a seal is already in this groove, your product DOES NOT require repair. Please throw away the enclosed seal. Replace the battery compart- ment door and tighten the screws. Do not over-tighten the screws.

5

•Using a flathead screwdriver, carefully push the seal completely into the groove in the battery compartment.

•Replace the battery compartment door and tighten the screws. Do not over-tighten the screws.

Installation is complete.

•Fit the seal into the groove surrounding the battery compartment, as shown in the illustration.

Note: Always remove exhausted batteries from any product. Exhausted batteries can leak fluids that can cause a chemical burn or injury.

If you have further questions regarding installation, please call 1-800-567-7724. Or, write to:

Mattel Canada Inc.

6155 Freemont Blvd.

Mississauga, Ontario L5R 3W2