Calibrating the Stylus
IMPORTANT! The mark made on your screen from the stylus and the location of the tip of the stylus may not align. When this happens, you need to calibrate the stylus.
•Turn Pixter™ power on. Wait until you see the Home Screen.
•Turn Pixterover and locate the calibration hole.
•Insert, push and hold the stylus in the calibration hole. Turn Pixter over so that you can see the screen.
•When you see two 
, remove the stylus from the calibration hole.
•First touch the 
in the upper right corner with the tip of the stylus.
•Then, touch the 
in the lower left corner with the tip of the stylus.
34 | e |
