Assembly
1
1 | 10 | 1 |
|
|
6
5
3
5
7
4
2
14
8
Front View
1Open the base and position it so that the front faces you.
2Position the right main door with the flat, rectangular area facing you.
3Fit the right main door top peg into the upper hinge in the door opening.
4Slide the right main door bottom peg into the lower hinge in the door opening.
5 Repeat this procedure to attach the left main door.
6 Fit the end of the flag post to the peg on the top surface of the base.
7 Insert and snap the peg on the toy latch into the hole in the front of the base, above the cactus. 8 Fit the fence clamps to fence posts to create the corral.
Proper label application will help to keep the labels looking their best.
•Wash your hands before applying the labels.
•Make sure the areas where the labels will be applied are clean and dry. Wipe this product with a clean, soft, dry cloth to remove any dust or oils.
•For best results, do not attempt to apply a label more than once.
•Apply the labels (#1, #5, #10 and #14) as shown in the illustration.
3
