GETTING READY FOR RESCUE
IMPORTANT! Attachment of the connector to the back of the figure is a permanent assembly.
Backpack
Connector
Grooves
•Position the backpack and the figure upright.
•Slide the backpack con- nector into the grooves on the back of the figure until you hear a “click”.
•Slide the backpack up to remove it from the figure.
The connector should remain attached to the figure.
LET'S GO
•Fit the backpack onto the connector on the figure’s back.
•Press the button on the backpack to hear the figure talk and watch the light flash!
•Press the button again
to hear more phrases!
2
