Fisher-Price 79545 Assembly, Button Hole Plastic Mesh Cover Stay Frame Middle Hole, Canopy Tunnel

ASSEMBLY

IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact Fisher-Price® for replacement parts and instructions if needed.

Never substitute parts.

Button Hole

Plastic Mesh

1	Cover Stay	3	Frame
		Middle Hole	Middle Hole
	Mesh Cover

Frame Tube Frame Tube

Base

•Open the base and position it upright on a flat surface, as shown.

•Locate the end of the base with the mesh cover. Insert the entire plastic mesh cover stay into one of the button holes in the mesh cover.

•Be sure to tuck the plastic mesh cover stay away from the button hole in the mesh cover.

Canopy Tunnel

2

•Position the ends of the frame tubes against the middle holes in a frame.

4M6 Lock Nut

Frame Tube

Metal	Frame Tube
		Frame
Canopy
Stay		Protruding
		Side
	M6 x 15/8" Screw - 4	M6 Lock Nut - 4
	• Insert an M6 x 15/8" screw through each frame tube and into
	the frame.
	• Fit an M6 lock nut (so that the protruding side is toward the
	fabric) into each middle opening on the back of the frame.

• Insert the metal canopy stay through the canopy tunnel.

4