![](/images/new-backgrounds/1138691/1386917x1.webp)
Assembly![](/images/new-backgrounds/1138691/1386917xi2.webp)
IMPORTANT! Before each use or assembly, inspect this product for damaged hardware, loose joints, missing parts or sharp edges. DO NOT use if any parts are missing or broken. Contact
#8 x 1/2" Screw - 2
SHOWN ACTUAL SIZE
Lower Leg | Foot |
|
1
Button
Hole Up Button
Hole Up
Storage
Pouch
Pockets
Upper
Legs
•Position a lower leg so that it stands on a flat surface, as shown.
•Fit a foot onto the end of the lower leg.
•Insert a #8 x 1/2" screw through the bottom of the foot and into the lower leg. Tighten the screw with a Phillips screwdriver. Do not
•Repeat this procedure to assemble the other foot to the other lower leg.
Red Dot Up
Upper Leg
3
•Position the storage pouch with the pockets toward you, and the button holes are up.
•Position the legs so that the feet are away from you.
•Slide the storage pouch onto the upper legs.
Straight |
|
|
End |
| Rivet |
Button |
| |
| Through | |
|
| |
| Button | Button |
Hole | Hole | Hole |
| Lower Leg |
|
2
•Position an upper leg so that the red dot is up.
•While pressing the button on the straight end of an upper leg, insert the upper leg into a lower leg. Make sure the but- ton on the upper leg “snaps” into the hole in the lower leg.
•Repeat this procedure to assemble the other upper leg to the other lower leg.
4
•Fit the rivets on the upper legs through the button holes in top ends of the storage pouch.
4