Assembly
1
Bases
Hub
The piano can be assembled to the hubs
for Lay & play or Sit & play modes.
Piano
• Fit a hub to a base.
Hint: The hubs are designed to fit each base one way. If a hub does not seem to fit, try assembling it to the other base.
•Insert four screws into the hub and tighten.
•Repeat this procedure to assemble the other base and hub.
Lay & play
3Sit & Play
2 Mat
•Place the mat, print side up, between the bases.
•Fit all three straps on each side of the mat into the slots in the bases. Make sure the tab on the end of each strap forms a "T" on the other side of the slot.
•Pull up on the mat to be sure it is
assembled to the bases. | 4 |
•Fit the piano onto the peg on each hub.
•Tighten each hub to secure the piano in place.
