Assembly
1 | 2 | 3 | 4 |
Fit the peg on one side of the cargo tray into the hole in the tower base. Press and “snap” the peg on the opposite side of the tray into the other hole in the base.
“Snap” the control tower into the tower base.
“Snap” the arm into the top of the control tower.
“Snap” the flags into the tower, as shown.
5 | 6 | 7 |
“Snap” the controller base into the tower base, as shown.
“Snap” the handle on to the post on the controller base.
Fit the long and short runways onto the controller base, as shown.
Hint: The two runway pieces can be removed for storage.
Assembly is now complete!
