Assembly
Seat Back Tube
Buttons
#6 x 1.9 cm Screws - 4
7
Shown Actual Size
•Insert two #6 x 1.9 cm screws through the upper swing arm
and into the lower swing arm. Tighten the screws.
8
Swing Arm Short Tubes
• Position the seat back tube so that it curves toward the back of the swing.
• While pressing the buttons on the seat back tube, fit the seat back tube into the short tubes on the swing arms.
• Push the seat back tube until it “clicks” into place.
• Pull up on the seat back tube to be sure it is secure to the swing arms.
7