Problems and Solutions
Problem | Cause | Solution |
No bubbles | Not enough bubble solution in | Press down on bubble solution |
| bubble chamber | bottle for 15 seconds to refill. |
| Bubble chamber is clogged | Follow instructions in “Let’s |
| and dirty | Clean Up” section to clean bubble |
|
| chamber thoroughly. |
| You have not walked far enough | The bubble mower needs to be |
| to produce bubbles | pushed a minimum of |
|
| walking steps before bubbles |
|
| begin to flow. |
|
|
|
| You are walking too quickly | Walk at a slow, steady pace. |
|
|
|
| The rear wheels do not contact | Push the mower so that the |
| the ground | rear wheels always contact |
|
| the ground. |
| Silicone or oily lubricants | Never use silicone or oily |
| got into the bubble chamber | lubricants on this product (the |
|
| wheels). Bubbles will not form |
|
| if even a very small amount of |
|
| these substances get into the |
|
| bubble chamber. |
|
|
|
Bubble solution is leaking from | Bubble chamber | Fill only by using the filler cap |
the mower |
| which will dispense the correct |
|
| amount of solution. |
| The mower is used on an | Use the mower only on flat, |
| inclined surface | level ground. |
Bubble solution is foaming | Bubble chamber is clogged | Follow instructions in "Let's |
|
| Clean Up" section to clean bubble |
|
| chamber thoroughly. |
|
|
|
CONSUMER ASSISTANCE
Outside the United States:
Canada: Mattel Canada Inc., 6155 Freemont Blvd.,
Mississauga, Ontario L5R 3W2; www.service.mattel.com.
Great Britain: Mattel UK Ltd, Vanwall Business Park,
Maidenhead SL6 4UB. Helpline: 01628 500303.
www.service.mattel.com/uk
Australia: Mattel Australia Pty. Ltd., 658 Church Street,
Locked Bag #870, Richmond, Victoria 3121 Australia.
New Zealand:
Albany 1331, Auckland.
6