Manuals / Fisher-Price / Baby / Accessories

Fisher-Price H9998 Assembly, Fit the crib adapter to the base, Tighten the screw in the disc

Models: H9998

1 12

Download 12 pages 36.52 Kb

Page 5

Assembly

Assembly

1

Crib Adapter

•Fit the crib adapter to the base.

•Tighten the three screws in the crib adapter.

21

Disc

Frame

•Fit the peg on a disc onto one of the posts on the frame, as shown.

•Tighten the screw in the disc.

•Repeat this procedure to attach the other two discs to the frame.

5

Image 5

Fisher-Price H9998 Assembly, Fit the crib adapter to the base, Tighten the screw in the disc, Crib Adapter, Disc Frame

Contents

as it contains important information Adult assembly is required H9998Tool required for assembly Phillips screwdriver not included Mix & Match Musical MobileParts Hint We recommend using alkaline batteries for longer life Battery Installation1.5V x “C” LR14 Battery Safety InformationRepeat this procedure to attach the other two discs to the frame AssemblyFit the crib adapter to the base Fit the peg on a disc onto one of the posts on the frame, as shownFit the dome into the end of the arm Tighten the screw in the dome AssemblySnap the frame to the underside of the dome, as shown Dome ArmBase Attachment AssemblyMobile Attachment top rail, so that the Crib Attachmentthreaded peg extends outside the cribChoose this position for lights, motions and music with lower volume Lights, Sounds and Gentle MotionsSlide the switch to this position to turn off Mode Switchand pull to remove the frame. Set the frame aside Change to a Crib Side Music BoxLoosen the screw in the from the baseChange to a Crib Side Music Box FCC Statement United States Only CareConsumer Information Soft Toys