|
| Assembly |
|
FIRST, Insert the |
|
|
|
screw so that 3/4" is | Handlebar |
| Handlebar |
visible. THEN, |
| ||
|
| ||
tighten the screw. |
|
|
|
3/4" |
|
|
|
|
| Frame |
|
|
| Neck |
|
|
| Fork | Tab |
|
| Post | |
|
|
| |
|
| Basket |
|
Fork Cover
Rear of Trike
9
11
•Insert the fork post up through the hole in the neck of the frame. Make sure the fork is positioned so that the fork covers face the rear wheels.
•Place the handlebar onto the fork post and push it down onto the frame. Make sure the handlebar is positioned so that the screw hole faces the rear wheels and aligns with the screw hole in the fork post.
Hint: You may need to rotate the handlebar to align the holes.
•Insert the #8 x 3" screw through the hole in the handlebar and into the fork post so that part of the screw (about 3/4") is still visible. Tighten the screw.
Cap
•Fit the basket on the tab on the front of the handlebar.
•Insert two #8 x 3/4" screws into the top of the basket and tighten.
Seat Retainer
Seat
Peg
Holes
12
• Position the seat upside down.
• Fit the small pegs on the seat retainer into the holes in the seat.
10
•Insert and “snap” the cap into the hole in the frame.
5
