Fisher-Price J5970

Assembly

• Place the loops at the top of the net into the grooves

on the ring.

• Pull each loop through a ring tab, as shown.

Groove

Ring

Ring Tab

Groove Ring

Tab

Hole

Rectangular

Tabs

Hole

Rim

Hole

Net Assembly

• Place the rim on a flat surface with the rectangular

tabs facing up.

• Locate the four screw holes on the underside of the

net assembly.

• Align the four screw holes on the underside of the net

assembly with the four holes in the rim.

• Place the net assembly onto the rim.

• While holding the ring assembly and rim together,

turn them over.

• Insert four screws into the holes in the rim, making sure

each hole in the rim is still aligned with each screw hole in

the net assembly.

• Partially tighten the screws with a Phillips screwdriver. Turn

the rim over to ensure that the net loops are still in the

grooves and through the ring tabs before completely tight-

ening the screws. Do not over-tighten the screws.

Rim

• Turn the rim upside down.

• Twist and insert the ends of the ball return into the slots in

the rim.

• Pull on the ball return to be sure all six ends are fastened

to the rim.