• At an angle, insert a peg on the roller
ball into the socket in the front of the
handle. Then, push to “snap” the other
peg on the roller ball into the other
socket in the handle.
3
Assembly• “Snap” the hubs to the back of the
base, as shown.
2
• Press the buttons on the side of the
handle and “snap” the handle into the
openings in the base.
4
• Press the buttons on the side of the
handle and “snap” the handle into the
openings in the hubs.
5
Walker
PRESS
PRESS
Wagon
PRESS
PRESS
Hint: You can assemble the handle in
either of two positions: Walker or Wagon.
3