Assembly
Strap
Tab
Mat
1Support
•Place the mat, print side up, on a flat surface
•Fit both straps on each side of the mat down through the slots in the supports. Make sure the tab on the end of the strap forms a "T" under the support.
•“Snap” both tabs on the mat into the slots in the support.
•Pull up on the mat to be sure it is secured to the supports.
Giraffe Tube
Palm Tube
Long Tube
3
•Fit the ends of the long tube into the openings in the supports, as shown.
2
•Fit the palm tube and the giraffe tube into the openings in the supports, as shown.
