Assembly
Screw Retainers
Front Base
11
•Fit the frame front legs onto the front base.
•Fit a screw retainer over the hole in a front leg.
•Insert a #10 x 2,2 cm black screw through the screw retainer and front leg.Tighten the screw.
•Repeat this procedure to fasten the other end of the front base with the remaining screw retainer and
#10 x 2,2 cm black screw.
Hint: The #10 x 2,2 cm black screws may have been assembled to the screw retainers.
Seat Height Adjusters
13 | Seat Bottom Tube Ends |
|
•From the back and bottom of the assembly, insert a #8 x 1,9 cm screw through both seat height adjusters and the ends of the seat bottom tube. Tighten the screws. This may require extra force.
PRESS 
PRESS
Push | Push |
| 14 |
| •Squeeze the restraint release tabs together. |
| •Remove the ends of the restraint system from the peg. |
12 |
|
•Push each seat height adjuster to be sure they are |
|
completely on the seat bottom tubes. |
|
•Insert a #8 x 1,9 cm screw through each seat height |
|
adjuster and the ends of the seat bottom tube. Tighten |
|
the screws. This may require extra force. |
|
