Assembly
Hole
Handle
Hole
11
•Position a handle so that the curved edge is down.
•Fit a handle to the upper end of two legs, as shown.
•Insert an M6 x 40 mm screw into the hole in the top of each leg. Tighten each screw with the Allen wrench.
•Repeat this procedure to assemble the other handle to the assembly.
Lower Canopy Tube
PRESS
A
Ring
Socket
B 
1
•Locate the ring on one side of the bassinet.
•While pressing the button on the end of the lower canopy tube, insert it into the ring on the bassinet A .
Hint: If the lower canopy tube does not seem to fit into the ring, turn it over and try again!
•Insert the end of the lower canopy tube into the socket in the bassinet B . Push the tube until you hear a "click". Pull up on the tube to be sure it is secure.
7
