Swinging and Music | Storage |
Music Switch
Power Switch
•Place your child in the seat and secure properly.
Hint: After turning on power, this product may not swing unless there is a child in the seat.
•Slide the power switch to any of five speed settings.
•Give the seat a light push to start the swinging motion.
Adjust the power switch to the desired swing motion setting.
Hint: As with most | |
will reduce the amount of swinging motion on all settings. | |
In most cases, the low setting works best for a smaller child | |
while the high setting works best for a larger child. | |
•If swinging stops while using a lower setting, try a higher | |
setting. Give the seat a light push to start the swinging | |
motion again. |
|
•Slide the music switch to on with low volume ; on with | |
high volume | or off . |
•Be sure to turn this product off when not in use. Slide | |
the power switch to the off setting . | |
•Make sure your child is properly secured in the swing seat. |
•Grasp both handles, as shown, and lift. |
| |
•Carefully carry the swing to another room. Be sure to set | •Lift the seat bottom. | |
the swing down on a | ||
|
•Press the frame release buttons on the inside of the frames and push the front legs inward.
8