Assembly
Back Brace
Frame
2
• Fit the back brace onto the same frame.
Hint: The back brace will only fit on the frame one way. If it does not seem to fit, turn it around and try again!
•Insert an M3,5 x 15mm screw into the hole in the frame and tighten.
Seat
Frame
Assembly
SIDE VIEW
71
•Fit the seat onto the frame assembly. Push down on the seat to fit in place.
31
•Fit the other frame onto the braces.
•Insert three M3,5 x 15mm screws into the holes in the frame and tighten.
BOTTOM VIEW
81
•While holding the seat in place, turn the assembly face down.
•Insert two M 4,5 x 18mm washer head screws into the holes in the back of the seat, as shown.
•Tighten the screws.
