Assembly
Sure Score™
Rim
Rim Assembly
9
•Snap the Sure score™ rim onto the rim assembly.
Plug
10
•After assembly is complete, fill each base with water or approximately 20 lbs of sand (water or sand not included) to keep this product stationary. Simply lift the plug, fill the base and then replace the plug.
Adjusting the Rim Height
IMPORTANT! Rim height should only be adjusted by an adult.
Also, make sure children are not standing below
the rim when adjusting the rim height.
Upper Post
Groove
Latch
Lower Post
•To lower the rim height: While holding the upper post, flip the latch on the lower post down. Lower the upper post and flip the latch into the groove to secure in place.
•To raise the rim height: Simply lift the upper post and flip the latch into the groove to secure in place.
6
