Assembly
1
Rear Wheel
(Indented Side Down)
Hubcap
(Peg Side Up)
Straight Axle
Rear Wheel |
|
(Indented Side Up) | Cap Nut |
Hubcap
(Peg Side Down)
Straight Axle
Frame | Cover |
Hubcap
| Assembled |
| |
| Rear Wheel |
| |
3 | Scrap Block | Cap Nut | |
of Wood | |||
Assembly Tool | |||
|
•Slide a hubcap (peg side up) onto the straight axle.
•Slide a rear wheel (indented side down) onto the straight axle.
Frame
•Turn the frame on its side with the exposed end of the straight axle up.
•Place the cap nut assembly tool under the assembled rear wheel and onto the cap nut.
•Slide a rear wheel (indented side up) onto the end of the straight axle.
•Slide a hubcap (peg side down) onto the straight axle.
•Place a cap nut on the end of the straight axle. Tap the cap nut with a hammer. Gently pull the rear wheel up to be sure the cap nut is securely attached to the straight axle.
•Insert one of the tabs on a cover into a slot in the hubcap. Push to snap the cover into place. Repeat this procedure to attach the other cover to the other hubcap.
Hole | Hole |
Pedal Hub
Pedal Axle
Tab
Straight Axle
2
BOTTOM VIEW
•Turn the frame upside down.
•Insert the straight axle through the holes in the rear of the frame.
Tab
Slot
Pedal Hub
4
•Fit two pedal hubs onto the pedal axle tabs. Make sure the tabs fit into the slot in each pedal hub.
3
