Infant Seat/Rocker Assembly
Seat Back Tube
5
PRESS
Sockets
Lower Pocket
Hardboard
•Insert the seat back tube into the socket in each side rail.
•While pressing the tabs on the ends of the seat back tube, continue to insert the seat back tube into the sockets in each side rail until the tabs “snap” into place. Make sure you hear a “snap” on each side.
•Pull the seat back tube up to be sure it is secure in the side rail sockets.
Upper Pocket
Seat Back Tube
7
• Fit the upper pocket on the pad onto the seat back tube.
• Turn the hardboard over and insert it into the slot in the front edge of the pad.
PRESS
PRESS
Kickstand
6
•While pressing the tab on each end of the kickstand, insert the kickstand into the small tube inside each side rail.
Hint: The kickstand is designed to fit into the siderails one way. If you cannot insert it into the small tubes (inside the side rails), turn it around and
•Push the kickstand into the small tubes until the tabs “snap” into place. Make sure you hear a “snap” on each side.
•Pull the kickstand to be sure it is secure in each side rail.
5