Battery Installation
1.5V x 6
“AAA” (LR03)
Note: We recommend the use of alkaline batteries for longer battery life.
•Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).
Engine
• Locate the battery compartment on the back of the engine.
• Loosen the screws in the battery compartment door with a Phillips screwdriver. Lower the battery compartment door and insert three “AAA” (LR03) alkaline batteries.
• Close the battery compartment door and tighten the screws with a Phillips screwdriver. Do not
• If this product begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them in the toy.
IMPORTANT! Under normal use conditions, the batteries in the vehicle will require replacement more often than the batteries in the remote controller.
Remote Controller
• Locate the battery compartment on the bottom of the remote controller.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door and insert three “AAA” (LR03) alkaline batteries.
• Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not
• If this product begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them in the toy.
2
