Battery Installation | Battery Safety Information |
Hint: We recommend using alkaline batteries for longer battery life.
1,5V x 4
“C” (LR14)
Swing/Sounds Battery Installation
•Locate the swing/sounds battery compartment on a swing housing.
•Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.
•Insert four “C” (LR14) alkaline batteries into the battery compartment.
•Replace the battery compartment door and tighten the screws with a Phillips screwdriver.
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline, standard
•Insert batteries as indicated inside the battery compartment.
•Remove batteries during long periods of
•Never
•Use only batteries of the same or equivalent type as recommended.
•Do not charge
•Remove rechargeable batteries from the product before charging.
•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
1,5V x 1
“D” (LR20)
Vibration Battery Installation
•Locate the vibration battery compartment on a swing housing.
•Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.
•Insert one “D” (LR20) alkaline battery into the battery compartment.
•Replace the battery compartment door and tighten the screw with a Phillips screwdriver.
•If this product begins to operate erratically, you may need to reset the electronics. Turn the power off and then back on.
•When motion or sounds from the product become slow/faint or stop, replace the batteries.
• Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).
7
