Assembly
Frame Tube Hubs
Latches
12 | BACK VIEW |
14 Crossbar
Tabs
•Fit the ends of the seat tubes up into the holes in each frame tube hub.
Hint: You may need the help of another adult to hold the seat assembly in place.
2 M5 x 32 mm
Screws
13
Note: Do not attach the seat tubes to the frame crossbar in this assembly step.
•While holding the seat assembly in place, insert an M5 x 32 mm screw into the hole in each frame tube hub. Tighten the screws with the Allen wrench.
• First lift, and then lower the latches onto the crossbar.
Pad
Holes
Elastic
Loops
15 | FRONT VIEW |
•Insert both elastic loops on the pad through the holes in the seat back.
8
