Testing Sound Reception
Power/Volume Dial
Sound Lights
Channel
Range Switch
Indicator
SIDE VIEW
•Place a receiver in the room where you intend to use it.
•Set the receiver channel switch to the same channel as the transmitter.
•Turn the power/volume dial to turn the power ON. Wait a few seconds to see if you have a good signal. If the range indicator light blinks along with beeping, you are out of range. Move the receiver closer to the transmitter.
•When sound is picked up by the receiver, the sound lights turn on.
-One or two lights indicate quieter sounds.
-Three or more lights indicate louder sounds.
•If the range indicator begins fl ashing, you may be experiencing interference. Try selecting a different channel on both the receiver and transmitter. If the range indicator continues to fl ash, move the receiver closer to the transmitter.
10
