Assembled Parts
2 Side Rails
SeatHandlebar (2 Pieces)
2 Fins
Body
Base
#8 x 1/2" Screws – 12
Shown Actual Size
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not
Assembly
CAUTION
This package contains small parts in its unassembled state. Adult assembly is required. Take extra care during unpacking and assembly.
Body
1 | Side Rail |
•Fit the tabs on one of the side rails into the slots in the body. Push to "snap" in place.
Hint: The side rails are designed to fit one way. If they do not seem to fit, try the other side.
•Repeat this procedure to assemble the other side rail.
Fin
Fin
2 | Screw |
•Fit a fin into each side of the body.
•Insert a screw into the fin and tighten.
2
