Battery Installation
1,5V x 6
“AAA” (LR03)
We recommend the use of alkaline batteries for longer battery life.
•Please keep this instruction sheet for future reference, as it contains important information.
•Requires six “AAA” (LR03) alkaline batteries (not included) for operation.
•Adult assembly is required for battery installation.
•Tool required for battery installation: Phillips screwdriver (not included).
Vehicle
• Loosen the screws in the bottom of the vehicle with a Phillips screwdriver. Lift the top of the vehicle off of
the chassis to access the battery compartment. Insert three “AAA” (LR03) alkaline batteries.
• Replace the top of the vehicle and tighten the screw with a Phillips screwdriver. Do not
•If the vehicle begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them in the vehicle.
IMPORTANT! Under normal use conditions, the batteries in the vehicle will require replacement more often than the batteries in the remote controller. For additional information, refer to the troubleshooting section on the last page of this sheet.
Remote Controller
• Locate the battery compartment on the bottom of the remote controller.
• Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door and insert three “AAA” (LR03) alkaline batteries.
• Replace the battery compartment door and tighten the screw with a Phillips screwdriver. Do not
•If the remote controller begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them in the remote controller.
• Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).
2
