Setup
Nighti Lighti Timeri Switchi (Back Sidei of Transmitter)i
Power Button
Channel
Switch
Nighti Lighti Button
Channell Switchi
•Set the transmitter channel switch to the same channel as the receiver.
•Place the transmitter in the same room with child. Point the microphone towards the crib/cot or play area.
•Unwrap and fully extend the AC adaptor for best transmission. Insert the AC adaptor pin into the DC input jack on the transmitter and plug the power cord into a standard wall outlet. Use the power cord only in a wall outlet. Do not plug into a ceiling outlet.
•Press the transmitter power button to turn the power ON (the button lights up).
•Press the night light button for a soft, glowing light. (Press again to turn off the night light.)
•Slide the night light timer switch to turn the timer 
on. When the timer is on the night light will
automatically shut off after 30 minutes.
10
