TW-7700 RECEIVER
Receiver
The TW-7700 Receiver.
Controls
Mode
This button does not have a function on the
Power On/Off
Turns the receiver on or off.
Light
Lights up the display for usage in dark areas. When the display is backlit, LIGHT is shown on the bottom left hand side of the display screen.
Bat
Press and hold this pad to check the battery level of the receiver. A bar graph on the right side of the display will give status of the batteries. When the graph shows 1 bar, it is time to replace the batteries. Additionally, as the operator uses the Receiver, if the batteries get low, RE- PLACE BATTERIES will appear in the lower area of the Display screen.
Vol(up)/Vol(down)
Increases or decreases the volume of the speaker.
Depth
After determining the centerline of the utility, set the blade of the receiver on the ground, press and hold this pad to get the depth to the center of the target.
5
