English 22
POWER FOR THE CAMERAThe supplied AC adaptor is used not only as the camera’s AC adaptor, but
also to charge the battery installed in the camera.
Using the battery pack
At the time of purchase, the battery pack is not charged. The battery pack
must be charged before it can be used in the camera. Also, if the battery
power becomes depleted when the camera is being used (see “CHECKING
THE REMAINING BATTERY PACK CHARGE” on page132), it should be
recharged as soon as possible.
1 Install the battery pack in the camera, and attach the cable adaptor
to the docking station terminal on the bottom of the camera.
2 Turn the camera off, and connect the AC adaptor to the DC IN socket
of the cable adaptor.
hCharging begins when the AC adaptor is connected. However, the
camera does not charge when it is set to the shooting mode or PC
camera mode.
hThe camera’s multi-indicator lights red during charging.
hCharging will take approximately 90 minutes.
hThe multi-indicator will turn off when the battery pack is fully charged.