Target mark
F3.5 1/30
Camera shake icon Shutter speed Aperture

HINT

Adjusting the monitor brightness

i While the Shooting Screen is active, you can quickly access the screen for adjusting the brightness of the monitor (page 154) by pressing the MENU button for at least 1 second.

What is the camera focusing on?

i A target mark & on the monitor shows the area the camera is focusing on.

i The camera automatically determines the correct focus by measuring from 9 different focus points within the shooting area. If the target mark is at a position that is different from the point you wish to focus on, you can refocus, for example, by changing the shooting angle.

i The large target mark appears when the camera focuses on a wide area in the center of the screen.

The focus can be locked

i By assigning an operation shortcut to the SET button (page 149), the autofocus can be set to a fixed focus. When the autofocus is fixed, the p icon appears on the monitor.

i When the focus range (page 72) setting is changed, the focus lock is released.

The shutter speed and aperture are displayed

i In the NORMAL mode, the shutter speed and aperture settings are shown on the Shooting Screen. You can use them as a reference when shooting.

If the camera shake icon > appears...

i During still image shooting, if the shutter speed is slow and the possibility that the image may be blurred due to camera shake becomes high, the camera shake icon may appear on the monitor. In this case, use a tripod to stabilize the camera when shooting, or set the flash operation mode to automatic (page 77).

i When shooting with the scene select function set to the fireworks + mode, the camera shake icon always appears, but this is normal.

SIMPLE/SHOOTING

English 76