Fluke 396, 397 manual Specifications, Waveform Generators Supplied Accessories

Waveform Generators

Supplied Accessories

•The proper power cord is connected to the unit. Do not use a two- conductor extension cord or a three-prong to two-prong adapter. This will defeat the protective feature of the third conductor in the power cord.

•The instrument is configured to operate on the voltage at the power source. See Installation Section.

•The proper fuse is in place for the power source to operate. The correct fuse to use is: Littelfuse, Cat.No. 218500; T, 250VAC, 0.5A.

•All other devices connected to or in proximity to this instrument are properly grounded or connected to the protective third-wire earth ground.

Supplied Accessories

The Instrument is supplied with this Getting Started Manual, a disk containing the Getting Started Manual and the Users Manual, and a disk containing a Windows version of the ArbExplorer software.

Specifications

The Instrument specifications are listed in Appendix A of the Users Manual. These specifications are the performance standards or limits against which the instrument is tested.

5