Fluke 9140 37, 8 Digital Communication Interface Interface Commands, Tabl e 3 9140 controller communications commands continued

37
8 Digital Communication Interface
Interface Commands
Command Description
Command
Format
Command
Example Returned
Returned
Example
Acceptable
Values
Set serial linefeed mode: lf[eed]=on/of[f] ON or OFF
Set serial linefeedmode to on lf[eed]=on lf=on
Set serial linefeed mode to off lf[eed]=of[f] lf=of
Miscellaneous Other Commands
Read firmware version number *ver[sion] *ver ver.9999,9.99 ver.9140,1.21
Read structure of all commands h[elp] h list of commands
Read ALL operating parameters all all list of parameters
Legend: [] Optional Command data
{} Returns either information
n Numeric data supplied by user
9 Numeric data returned touser
x Character data returnedto user
Note: When DUPLEX is set to FULL and a command is sent to READ, the command is returnedfollowed by a
carriage return and linefeed.Then the value is returned as indicated in the RETURNED column.
Tabl e 3 9140 controller communications commands continued