Power | Main unit and remote: |
| • Typical battery life: 12 to 14 hours |
| • Charge time (with tester off): 4 hours (below 40 °C) |
| • AC adapter/charger, USA version: Linear power supply; Input 108 V ac to 132 V ac, 60 Hz ; |
| Output 15 V dc, 1.2 A |
| • AC adapter/charger, international version: Switching power supply; Input 90 V ac to 264 V ac, |
| 48 to 62 Hz; Output 15 V dc, 1.2 A (isolated output) |
| • Memory backup power in main unit: Lithium battery |
| • Typical life of lithium battery: 5 years |
| • The battery will not charge at temperatures outside of 0°C to 45°C (32°F to 113°F). |
| The battery charges at a reduced rate between 40°C and 45°C (104°F and 113°F). |
|
|
Languages Supported | English, French, German, Spanish, Russian and Italian |
|
|
Calibration | Service center calibration period is 1 year |
|
|
Performance Specifications | Note: all specifications for tests on |
| for information on measurement performance for cable with a different impedance. |
|
|
Baseline accuracy | The baseline accuracy of all DTX Series testers meets or exceeds the requirements of Level IV in |
| 2nd Edition of IEC |
|
|
Category 6/Class E link | DTX CableAnalyzer far exceeds Level III requirements of |
test modes (and lower link |
|
categories) |
|
|
|
Length for Twisted Pair Cabling
(Length specs do not include the uncertainty of the cable’s NVP Value)
Parameter
Range
Resolution
Accuracy
800 m (2600 ft) | 150 m (490 ft) |
0.1 m or 1 ft | 0.1 m or 1 ft |
± (1m + 4%) | ± (1m + 4%) |
|
|
Delay Skew
Parameter
Range
Resolution
Accuracy
Twisted Pair Cabling
0 ns to 100 ns
1 ns
± 10 ns
DC Loop Resistance Test
Parameter | Twisted Pair Cabling |
|
|
Range | O Ω to 53Ω |
|
|
Resolution | 0.1 Ω |
|
|
Accuracy | ± (1 Ω + 1%) |
|
|
Overload Recovery Time | Less than 10 minutes to rated accuracy following |
| prolonged |
|
|