Fluke Fluke 16

Multimeter with Temperature

Snap

Snaps

ig2f.eps

Figure 2. Removing and Reinserting the Printed Circuit Assembly

Contents

Main Multimeter with Temperature Calibration Information W Introduction Service f E J K [0 to 200 A 0.1 A(1% + 2 counts) f E J L [600 V rms or dc <5 mV/A >100 dB @ dc 50 Hz or 60 \600 V rms or dc <5 mV/A >60 dB at dc, 50 Hz or Disassembly and Reassembly Note Before reinserting the pca, make sure that the rotary knob is in the OFF position. Cleaning W Recommended Test Equipment Recommended Test Equipment Page Performance Test Performance Test W Warning Multimeter Temperature Calibration Adjustments Table 4. Temperature Performance Tests Calibration Adjustments + + _ + Temperature Replacement Parts Replacement Parts + Figure 6. Calibration Adjustment for Temperature Using an Ice or Lag Bath R38 REF# REF +