Clamp Meter
Safety Information
•Remove the test leads from the Meter before the battery door is opened.
•Examine the test leads for damaged insulation or exposed metal. Check test lead continuity. Replace damaged test leads before using the Meter.
•Do not use the Meter if it operates incorrectly. Protection can be compromised. When in doubt, have the Meter serviced.
•Do not use the Meter around explosive gas, vapor or in damp or wet environments.
•When measuring, keep fingers behind the Tactile Barrier. See "The Meter" .
•Use only type AA batteries, properly installed in the Meter case, to power the Meter.
•To avoid false readings that can lead to electrical shock and injury, replace the batteries as soon as the low battery indicator () appears.
•When servicing the Meter, use only specified replacement parts.
•Have the Meter serviced only by qualified service personnel.
•Be careful around voltages > 30 V ac rms, 42 V ac peak, or 60 V dc. Such voltages pose a shock hazard.
•Do not apply more than the rated voltage, as marked on the Meter, between the terminals or between any terminal and earth ground.
•When using the probes, keep fingers behind the finger guards on the probes.
3
