Fluke Ti10, Ti25, TiR, TiR1 Focusing and Capturing an Image

Ti10, Ti25, TiR and TiR1
Users Manual
6
Setting the Date
To set the date:
1. Press a until Date appears over the F1 softkey.
2. Press the softkey labeled Date.
The date can be displayed in one of two formats: MM/DD/YY or DD/MM/YY.
3. Press the softkey labeled with the desired date format.
4. Press the softkey labeled Up (c) or Down (d) to adjust the selected date
element.
5. Press the softkey labeled Next to move to the next date element.
6. Press the softkey labeled Done when finished.
Setting the Time
To set the time:
1. Press a until Time appears over the F3 softkey.
2. Press the softkey labeled Time.
The Imager will display time in two different formats: 24 hour or 12 hour.
3. Press the softkey labeled with the desired format.
4. Press the softkey labeled Up (c) or Down (d) to adjust the selected time
element.
5. Press the softkey labeled Next to move to the next time element.
6. Press softkey labeled Done when finished.
The 12 hour format has a selection for setting whether the time is AM or PM.
Focusing and Capturing an Image
Point the Imager at the object or area of interest, focus by turning the focus
control until the image displayed on the LCD is as clear as possible, and then
press and release the trigger. The Imager displays the captured image and a
menu. The TiR and Ti10 menu allows image storage. The TiR1 and Ti25 menu
allow image storage, image setting adjustments, and recording of audio
annotations. To cancel image storage and return to live viewing, press and
release the trigger.