Fluke Ti10, Ti25, TiR, TiR1 Unpacking the Imager , Charging the Battery , Turning the Imager On and Off , Features and Controls

Thermal Imagers

Unpacking the Imager

Unpacking the Imager

Carefully unpack the following items:

• Ti10, Ti25, TiR or TiR1 Ima ger

• AC Power Adapter/Charger

• Rugged Carrying Case

• SD Memory Card

• SD Card Reader

• Soft Transport Bag

• User Manuals (in various languages)

• SmartView™ Software

• Warranty Registration Card

Charging the Battery

Before using the Imager for the first time, charge the battery for at least two

hours. The Imager’s battery condition is displayed in the upper-left corner of

the display. When the last segment of the battery icon extinguishes, the Imager

will shut down and will require recharging before operating again. To charge

the Imager’s battery:

1. Plug the ac input of the battery charger into an ac wall outlet.

2. Plug the battery charger’s dc output into the Imagers ac adapter socket.

The optional Car Charger can also be used to recharge the Imager’s battery.

While the battery is charging, the battery icon appears as A while the

Imager is operating. With the Imager off, b appears in the display while

connected to the battery charger.

Turning the Imager On and Off

To turn the Imager on or off, press the center softkey (a) for two seconds.

Features and Controls

Imager features and controls are shown and described in Table 2.