CABLES
IMPORTANT
•Use only 1.00mm2 size cable up to 40 metres length maximum.
Maximum rating :
1.00mm2 size cable, 10 amps 250 volts AC.
•THE VENTURER 320 IS SUPPLIED WITH CABLE WIRED DIRECTLY INTO THE PRODUCT.
1.Flymo Mains Cables and Extension Cables are available from your local Electrolux Outdoor Products Approved Service Centre.
2.Do not wire an extension cable directly to your product yourself. Please contact your local Electrolux Outdoor Products Approved Service Centre for further information on the connectors and kits available.
3.Only use extension cables specifically designed for
outdoor use.
CONNECTORS
IMPORTANT
•Flymo connectors are suitable for use with 2 core cable only. Under no circumstances should these connectors be used for earthed products.
•All Flymo connectors and cables are of splashproof construction. They are not waterproof and must not be left outside permanently nor should they be submerged or immersed in water. Do not let cable lay or trail through pools of water or splashed with water from hose pipes.
MAINS PLUG REPLACEMENT
IMPORTANT
•If the plug supplied is cut off it should be destroyed. There is an electric shock hazard if a cut off plug is inserted into a 13 amp socket.
1.No earth required. Flymo products are double insulated to EN60335 and under no circumstances should an earth be connected to any part of the product.
2.Ensure the mains voltage suits your product
3.IMPORTANT!
The wires in the mains lead are coloured in accor- dance with the following code:
BLUE - NEUTRAL BROWN - LIVE
The wire which is coloured BLUE must be connect- ed to the Terminal which is marked with the letter 'N' or coloured BLACK.
The wire which is coloured BROWN must be con- nected to the Terminal which is marked with the let- ter 'L' or coloured RED.
4.It is important that the outer sheath is clamped cor- rectly into the
5.If in doubt consult your local Service Repairer or qualified electrician before the machine is used.
6.A 13 Amp fuse must be fitted to the Mains Plug.
7.The normal plug fuse and household fuse only pro- tect the electrical equipment and are not a safe- guard against electrocution.
If your product is hard wired i.e.
Assembly Instructions
A
ensure the point of the screw stays inside the handle.
B |
|
C | D |
1
Assembly of Lower Handles to Deck
1.Locate 2 screws into the holes in the handles.
2.Using a pozidrive screwdriver, secure the
screws into the lower handles, ensuring the point of the screw stays inside the handle. (A)
3.Insert lower handles with screws attached, into the deck and fully tighten screws. (B)
NOTE:
The screw will form its own thread.
Assembly of Upper Handles to Lower Handles.
1.Ensure the upper handle is located correctly with the
2.Ensure the upper handle and the lower handle are aligned correctly.(C)
3.Insert the nut (C1) into the handle knob.
4.Fit the bolts, washers and handle knobs.(C)
5.Fit the cable to the handles with the clips provid- ed. Make sure the cable is not trapped between the upper and lower handles.
Grassbox Assembly (D)
1.Locate grassbox upper into grassbox lower. Align clips, ensure all clips are correctly located.
2.Clip the two halves together.
3.Ensure all clips are securely connected.
