Service Recommendations
1.We strongly recommend that your product is serv- iced at least every twelve months, more often in a professional application.
2.Always use genuine Husqvarna Spare Parts.
3.Prepacked spares are available from most Husq- varna UK Ltd. stockists.
4.Your product is uniquely identified by a silver and black product rating label
5.If you have a problem with your machine contact your local Approved Service Centre ensuring you have full details of your product as described on the product rating label.
6.Should it be necessary for work to be carried out by your Service Centre, it is important to take your complete ma-
chine including cable and any extension cables used.
A network of specialist dealers can be found in your local Yellow Pages. To obtain service on your product simply telephone or visit your local Service Centre. Should you require service under the terms of our guarantee the Service Centre will require proof of purchase.
All of the centres listed stock genuine Husqvarna Spare Parts.
NOTE: Our Service Repairers act on their own behalf and are not empowered to commit or legally bind Husqvarna UK Ltd. in any manner whatsoever.
EC Declaration of Conformity
Husqvarna AB, 561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Category | Battery Hedgetrimmer |
Type(s) | ECC500 |
Identification of Series | See Product Rating Label |
Year of Construction | See Product Rating Label |
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC, 2000/14/EC
based on the following EU harmonized standards applied:
The maximum A weighted sound pressure level LpA at the work station, measured according to
The maximum hand / arm vibration weighted value, measured according to
The declared vibration total value has been measured in accordance with a standard test method and may be used for comparing one tool with another.
The declared vibration total value may also be used in a preliminary assessment of exposure. Warning:
The vibration emission during actual use of the power tool can differ from the declared total value depending on the ways in which the tool is used.
Operators should identify safety measures to protect themselves that are based on an estimation of exposure in the ac- tual conditions of use (taking account of all parts of the operating cycle such as the times when the tool is switched off and when it is running idle in addition to the trigger time).
2000/14/EC: The Measured Sound Power LWA & Guaranteed Sound Power LWA values are according to the tabulated figures.
Conformity Assessment Procedure | Annex V |
Notified Body | Intertek, Cleeve Road |
| Leatherhead, Surrey |
Newton Aycliffe 26/01/2011 | KT22 7SB, England |
| |
P. Lameli |
|
Global R&D Director - Hand held |
|
Keeper of technical documentation |
|
Type | ECC500 |
Blade length (cm) | 50 |
Measured Sound Power LWA (dB(A)) | 93 |
Guaranteed Sound Power LWA (dB(A)) | 101 |
Level LpA(dB(A)) | 82 |
Uncertainty KpA (dB(A)) | 2.5 |
Value ah (m/s2) | 1.11 |
Uncertainty Kah (m/s2) | 1.5 |
Weight (Kg) | 3.2 |
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Copyright © 2011 Flymo S.A. All rights reserved. Flymo® and other product and feature names are registered or unregistered trademarks
| of Flymo S.A. |
| Husqvarna AB |
| 561 82 |
Huskvarna | |
Sweden |
