SAFETY PRECAUTIONS

If not used properly this product can be dangerous. The warnings and safety instructions must be followed to ensure reasonable safety and efficiency in using this product. The operator is responsible for following the warnings and instructions in this manual and on the product. Never use the product unless the guards provided by the manufacturer are in the correct position.

Explanation of Symbols on the product

Warning

Read the user instructions carefully to make sure you understand all the controls and what they do.

Do not operate in the rain or leave the product outdoors while raining.

Switch off! Remove plug from mains before adjusting, cleaning or if cable is entangled or damaged

The use of eye protection is recommended to protect against objects thrown by the cutting parts.

General

1.Never allow children or people unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator.

2.Only use the product in the manner and for the functions described in these instructions.

3.Never operate the product when you are tired, ill or under the influence of alcohol, drugs or medicine.

4.The operator or user is responsible for accidents or hazards occurring to other people

or their property.

Electrical

1.The British Standards Institute recommend the use of a Residual Current Device (R.C.D.) with a tripping current of not more than 30mA. Even with a R.C.D. installed 100% safety cannot be guaranteed and safe working practice must be followed at all times. Check your R.C.D. every time you use it.

2.Before use, examine cable for damage, replace it if there are signs of damage or ageing.

3.Do not use the product if the electric cables are damaged or worn.

4.Immediately disconnect from the mains electricity supply if the cable is cut, or the insulation is damaged. Do not touch the electric cable until the electrical supply has been disconnected. Do not repair a cut or damaged cable. Replace it with a new one.

5.Your electric cable must be uncoiled, coiled cables can overheat and reduce the efficiency of your product.

6.Keep the cable clear of the cutting area and obstacles at all times.

7.Never carry the product by the cable.

8.Never pull on the cable to disconnect any of the plugs

9.Do not pull cable around sharp objects.

10.Always switch off at the mains before disconnecting any plug, cable connector or extension cable.

11.Switch off, remove plug from mains and

examine electric supply cable for damage or ageing before winding cable for storage. Do not repair a damaged cable, replace it with a new one. Use only Husqvarna Outdoor Products replacement cable.

12.Always wind cable carefully, avoiding kinking.

13.Use only on AC mains supply voltage shown on the product rating label.

14.Our products are double insulated to EN50144. Under no circumstances should an earth be

connected to any part of the product.

Cables

Use only 1.00mm2 size cable up to 40 metres length maximum.

Maximum rating:

1.00mm2 size cable 10 amps 250 volts AC

1.Mains cables and extensions are available from your local Approved Service Centre.

2.Only use extension cables specifically designed for outdoor use.

Preparation

1.Always wear suitable clothing, gloves, and stout shoes. The use of safety glasses is recommended. Do not wear loose clothing or jewellery which can be caught in moving parts.

2.Thoroughly inspect the area where the product is to be used and remove all wires and other foreign objects.

3.Before using the machine and after any impact, check for signs of wear or damage and repair as necessary.

4.Always ensure the hand guard supplied is fitted before using the product. Never attempt to use an incomplete product or one with an

unauthorised modification.

Use

1.Use the product only in daylight or good artificial light.

2.Avoid operating your product on a wet hedge, where feasible.

3.Know how to stop the product quickly in an emergency.

4.Never hold the product by the guard.

5.Never operate the product with damaged guards or without guards in place.

6.Remove plug from mains before passing product to another person.

7.Avoid operating while people especially children are nearby.

8.Whilst using the product always be sure of a safe and secure operating position. Do not overreach. Keep proper footing and balance at all times.

9.Keep hands and feet away from the cutting

ENGLISH - 1

Page 6
Image 6
Flymo 6500XT, 7000XT, 5500, 6000XT manual General, Electrical, Preparation, Use

7000XT, 5500, 6500XT, 6000XT specifications

The Flymo range of robotic lawn mowers, including the 6000XT, 6500XT, 5500, and 7000XT, represents cutting-edge technology in garden maintenance, allowing homeowners to maintain a pristine lawn with minimal effort. Each model is designed with various features catering to different garden sizes and user preferences.

The Flymo 6000XT is designed for medium to large gardens of up to 600 square meters. One of its standout features is the ability to navigate complex garden layouts, including multiple narrow passages and obstacles, thanks to its advanced navigation system. It has a cutting height adjustment feature that allows users to customize the grass length according to their preference. The 6000XT is equipped with a robust battery that provides efficient mowing performance, ensuring it can cover the entire lawn without interruption.

The 6500XT, slightly more advanced, caters to larger areas of up to 800 square meters. It includes enhanced obstacle detection capabilities, which help it avoid garden furniture and other items, minimizing the risk of damage. Featuring a larger cutting width, the 6500XT significantly reduces mowing time, making it ideal for extensive lawns. It also boasts a rain sensor that intelligently pauses the mowing process during adverse weather conditions, ensuring optimal mowing results.

Moving on to the Flymo 5500, this model is perfect for small to medium-sized gardens, with a coverage area of around 500 square meters. Its compact design allows for easy navigation in tight spaces. The 5500 model shines with a user-friendly interface that makes operation and scheduling straightforward, enabling users to set up their mowing schedules with ease. The mower’s lightweight design makes it easy to transport and move between storage locations.

Finally, the Flymo 7000XT is the flagship model, tailored for expansive lawns of up to 1,000 square meters. Its robust build and strong motor allow it to tackle thick grass effortlessly. The 7000XT features intelligent programming capabilities, which allows it to adjust its mowing schedule based on the growth rate of the grass, thus optimizing performance. It also includes a powerful lithium-ion battery that ensures longer operational time, maximizing efficiency.

All Flymo robotic mowers feature a sleek design and are equipped with safety features, such as lift and tilt sensors that immediately stop the blades if the mower is lifted or tilted. With their eco-friendly operation, minimal noise levels, and efficient battery use, these models represent a significant advancement in lawn care technology, making them a popular choice for homeowners seeking convenience and performance in their gardening routine.