7
Spool Cap
• WARNING |
G | cap |
| release |
Disconnect from the mains |
electricity supply, before |
attempting any maintenance or |
adjustment. Cutting head |
continues to rotate after the |
trimmer has been switched off. |
To remove spool cap
1.Press and hold in the two cap release latches. See fig G.
2.Pull cap away from the cutting head.
See fig H.
When refitting the spool cap
H
latches
cap
1.Keep all areas of the cap and spoolholder clean. Failure to do so may prevent the cap being securely located in the spoolholder.
2.Align the two latches on the cap with the two windows in the spoolholder, then press down into the locked position.
3.Ensure the two cap release latches are clearly visible and are fully engaged with the windows in the spoolholder.
4.Check that the cap is correctly fitted by trying to remove it without depressing the two latches.
spool
manual linespoolholder
feed button | eyelet |
|
USE
