INSTALLATION
Continued
|
| Crossover | Crossover | Crossover | Crossover |
|
| Log (#4) | Log (#6) | ||
| Pins | Log (#4) | Log (#5) | ||
Middle |
|
| |||
|
|
| |||
Log (#2) |
| Back Log | Middle |
|
|
|
| (#3) | Log (#2) |
|
|
| Front |
| |
Figure 20 - Installing Crossover Log #4 | Log (#1) |
| |
|
| ||
(CCL3924PTA/NTA Shown) | Figure 22 - Installing Crossover Log #5 | ||
Crossover | |||
and Log #6 (CCL3018PTA/NTA Only) | |||
Log (#5) |
|
| |
Crossover |
| Crossover | |
| Log (#6) | ||
Log (#4) |
|
| |
|
| Pins | |
Front Log (#1) |
| Middle | |
| Front | Log (#2) | |
Figure 21 - Installing Crossover Log #5 | Log (#1) |
| |
(CCL3924PTA/NTA Shown) |
|
| |
For CCL3018PTA/NTA Only: Locate holes on bottom of crossover log (#5). Slide holes over left pins on middle log (#2) and front log (#1). See Figure 22.
6.Locate holes on bottom of crossover log (#6). Slide these holes onto right pins lo- cated in middle log (#2) and front log (#1).
See Figure 23, for CCL3924PTA/NTA. See
Figure 22 for CCL3018PTA/NTA.
7.Add lava rock around base of heater if desired. Do not place any lava rock on logs or burner.
Figure 23 - Installing Crossover Log #6
(CCL3924PTA/NTA Shown)
www.fmiproducts.com | 17 |